Aquanami jetSurf Instrukcja Użytkownika

AQUANAMI 2012 jetSurf jetKayak jetNami USER’S MANUAL • Read this manual thoroughly before operation. It contains important safety information. • Do n

10 Section 1 SAFETY INFORMATION

11 INTRODUCTION Congratulations, you are now the proud owner of a new generation Powerboard, one of the most exciting and fun watercrafts. Your Aqu

12 GENERAL The owner of the watercraft is responsible for the watercraft’s safe operation. The owner also has the responsibility to require that all

13 FUELING  When fueling, follow the safe boating fueling instructions explicitly, as provided in your User’s Manual and those given to you at the ma

14 RESPECTFUL USE OF WATERWAY Respect no wake zones, the rights of other water users and the environment. Don’t forget that all persons must as

15 GEARS AND EQUIPMENTS Always carry the regulatory safety items and have them conveniently on board available for use. Check the local regulations

16 SAFE RIDING • Respect the rights of other recreationists and/or bystanders and always keep a safe distance from all other craft, people and objec

17 • Ride within your limits and level of riding ability. Avoid aggressive maneuvers to reduce the risk of loss of control, ejection and collision. Un

18 OPERATING RULES Operating a watercraft can be compared with driving unmarked highways and roads. To prevent collisions or avoid other boaters, Na

19 NAVIGATION SYSTEM Refer to the following material: “Federal Requirements and Safety Tips for Recreational Boats” published by United States Coast G

2 WARNING Read This Safety Notice Completely Before Enjoying Your Aquanami Powerboard THIS WATERCRAFT DOES NOT HAVE A REVERSE GEAR OR BRAKING DEVICE

20 Section 2 POWERBOARD INFORMATION

21 GET TO KNOW YOUR POWERBOARD Before using your Power Board for the first time it is important that you become familiar with all of the features an

22 POWERBOARD AND MAIN COMPONENTS jetSurf NOTE: Some components do not apply or are optional on some models. 1. Safety Lanyard (engine cut-off cord)

23 24. Coolant Expansion Tank Cap 23. Coolant Fill/Pressure Valve Cap 27. Fuel Water Separator Bottle 25. Engine Breathing Oil

24 POWERBOARD AND MAIN COMPONENTS jetKayak NOTE: Some components do not apply or are optional on some models. 1. Safety Lanyard (engine cut-off cord

25 POWERBOARD AND MAIN COMPONENTS jetNami NOTE: Some components do not apply or are optional on some models. 1. Safety Lanyard (engine cut-off cord)

26 POWERBOARD AND MAIN COMPONENTS 1). Safety Lanyard (Engine Shut-off Cord) Attach the engine Safety Lanyard (Engine Shut-off Cord) to operator’s li

27 3). Engine Start and Stop Button To start engine, depress and hold the start button. Release immediately after engine is started. To stop engine,

28 • The fuel level indicator may provide false reading if the craft is not leveled. • After depressing start button, the information meter is on, whi

29 8). Fuel Tank Vent Vent air out from fuel tank when pressure builds up in the tank as temperature increases. This is a one way path only. It let

3 EXERCISE EXTREME CAUTION WHEN OPERATING AROUND OTHER BOATS For your safety, understand and follow all the safety precautions and instructions conta

30 12). Bilge Drain Plugs Should water be found in the bilge, it can be easily drained by opening the drain plugs when engine is off and watercraft

31 15). Bilge Pump Switch It is a push button switch to turn on the electric bilge pump manually located inside engine compartment, to evacua

32 19). Control Box Control Box. It holds CDI and all other electronic components. 20). Battery The battery is located in the engine compartment.

33 Certain components in the engine compartment may be very hot. Direct contact may result in skin burn.

34 26). Carburetor Drain Screw Located at the bottom of the carburetor in engine compartment. Use a Philip screw driver to drain water or contaminat

35 • Oil is flammable. Always wipe off any oil spillage from the bilge. • Certain components in the engine compartment may be very hot. Direct conta

36 Change Engine Oil YOU MUST CHANGE ENGINE OIL: • After First 10 Hours Operation • According To Maintenance Schedule In Section 4 • After Your P

37 Engine Coolant Recommended Coolant: Always use ethylene-glycol antifreeze containing corrosion inhibitors specifically for internal combustion al

38 • Always stop the engine before refueling. • Fuel is flammable and explosive under certain conditions. • Always work in a well ventilated area. Do

39 ITEM UNIT DATA Capacity Maximum people Number of People 1 Dimensions, weights and recommended maximum loads jetSurf Length cm (in) 254 (100)

4 THIS VESSEL USES AND STORES FLAMMABLE GASOLINE ON BOARD ALWAYS USE CAUTION AGAINST FIRE. AVOID OPEN FLAMES NEAR THE VESSEL, ENGINE COMPARTMENT OR

40 ITEM UNIT DATA Engine Type 4 stroke Max power kW (hp) 7 (9.5) Number of cylinders 1 Displacement cm3 (cu in) 149.6 (9.2) Bore mm (

41 ITEM UNIT DATA Fuel system Fuel tank capacity L (US gal) 7 (1.8) Play time at full throttle hours 2 Propulsion system Jet pump Aluminum/compo

42 Section 3 OPERATION

43 BREAK-IN PERIOD Your craft is equipped with a 4 stroke closed loop water cooled engine. Having a breaking-in period is crucial to its proper perf

44 10-Hour Inspection It is highly recommended that after the first 10 hours of operation, the watercraft be checked by an authorized Aquanami deale

45 PRE-OPERATION CHECKS • The pre-operation check is very important prior to operating the watercraft. Always check the proper operation of critical c

46 PRE-OPERATION CHECK LIST ITEM TO DO Start and Stop buttons Check operation. Safety Lanyard Check operation. Throttle Check operation. Steering sy

47 Throttle Check the throttle lever for free and smooth operation. It should return to its initial position immediately after it is released. Check

48 Armpole for jetSurf Armpole provides support to operator during operation. It also houses control cables and electric wires. Having a damage free

49  The battery must always be fully charged and in good condition. Loss of battery power may leave you stranded. Never operate the watercraft if th

5 For your safety, understand and follow all the safety precautions and instructions contained in this USER’S MANUAL. Failure to do so can result in S

50 Do not inspect the water intake or intake grate without removing the lanyard from the post.

51 Hull Inspect hull for cracks or damage. Dry Storage Compartment Cover Ensure the cover is tight. Seal is in good condition. Remove any water fr

52 Propulsion Principle The engine is directly coupled to a drive shaft which, in turn, rotates an impeller. The water is drawn up from underneath t

53 • For jetKayak models, throttle should be applied and steering handle turned to change the direction of the watercraft. Unlike a car, a watercraft

54 Boarding in Deep Water Swim to the side or front of the watercraft. Put your hands on the board and pull yourself up then get on. Once aboard, ta

55 CAUTION: • Ensure there is at least 60 cm (2 ft) of water when you are onboard prior to starting the engine. Otherwise damage to the impeller or o

56 In the event of a fall, do not hold on to the handle. Attempting to do so could result in an injury.

57 Shutting Off the Engine To shut off the engine, completely release throttle lever and press the engine stop button. Remove safety lanyard from wa

58 General Care Take the watercraft out of the water every day to prevent marine organism growth. Should any water be present in the bilge, open the

59 Certain components in the engine compartment may be very hot. Direct contact may result in skin burn. Do not touch any electrical parts or jet pump

6 For your safety, understand and follow all the safety precautions and instructions contained in this USER’S MANUAL. Failure to do so can result in S

60 SPECIAL PROCEDURES Water In Carburetor Once water gets into carburetor bowl, engine will not work properly. It may loose power and suddenly stop

61 A weed clogged area can be cleaned as follows: Stop engine and remove the Lanyard from its post to prevent accidental engine starting before clea

62 • If failed to drain the water from the bilge, do not attempt to crank engine to avoid water ingestion that would damage the engine. Bring the wat

63 Section 4 MAINTENANCE AND CARE

64 MAINTENANCE CHART Routine maintenance is necessary for all mechanical products. A periodic inspection contributes to the product’s good performan

65 10 hrs 50 hrs or 100 hrs or 200 hrs or ITEM 6 months 12 months 24 months GENERAL Lubrication/corrosion protection L L L L ENGINE Eng

66 PROPULSION SYSTEM Jet set (including impeller) I I I I Mechanic seal set (drive shaft) I I I Automatic vacuum siphon pump IC IC IC

67 General Inspection Check engine compartment for any damage and for leaks of fuel, coolant or oil. Ensure all hose clamps are properly secured and

68 • Gasoline is highly flammable and explosive. Failure to check and repair for any fuel leakage could resulting in fire or explosion, which can caus

69 Steering System Check steering mechanism to ensure steering operates smoothly, and no excessive lash in the system. Propulsion System Remove th

7 This USER’S MANUAL utilizes the following symbols: WARNING ! The Safety Alert Symbol means ATTENTION! A potential personal injury hazard. Indi

70 GENERAL Lubrication/corrosion protection Operator ENGINE Exhaust system condition and fasteners Dealer Condition of seals and fasteners Deale

71 Section 5 TROUBLE SHOOTING

72 Use this section to check for the possible cause of simple troubles you may have with your powerboard. You may solve some of the problems rathe

73 TROUBLE POSSIBLE CAUSE REMEDY Engine runs irregularly or stalls empty, stale or contaminated fuel siphon tank and refill watered carburetor and

74 TROUBLE POSSIBLE CAUSE REMEDY Abnormal vibration misalignment at the coupler between engine output shaft and jet drive shaft refer to a Aquanami

8 TO OWNER/OPERATOR Congratulations on your choice to purchase a Aquanami Powerboard. You have hours of fun and excitement to look forward to as it

9 TABLE OF CONTENTS Section 1: Safety Information Page 10 Section 2: Powerboard Information Page 20 Section 3: Operation Page 42 Section 4: M